ISO2531 DI pipe

DI pipe ISO2531 K9 1.DE:98mm 2.Tensile Strength:420min.Yield strength:300min 3.Bending strength:590min BrinellHardness:230max

Specification:

1) The standard of pipe: ISO2531:1998, K9

2) Effective length: 6m

3) Inner cement line: Portland cement line as per ISO4179

4) Zinc coating: at least 130g/m2 as per ISO8179

5) Bitumen painting: at least 70um as per ISO8179

6) With 100% quantity of NBR ring, or SBR ring, or EPDM ring as per ISO4633

7) DN80mm-800mm

8) High strength, lighter than grey iron, good corrosion resistance, no furring, small flow resistance, easy fixing, long life tome about 100 yeas

9) Produced by Hangzhou chunfeng machine

10) Checked by automatic inspection equipment

11) Composition:

Chemical composition
Chemical composition	Ductile Cast Iron Pipe (%)	Grey iron pipe (%)	Steel pipe (%)
C	3.5-4.0	3.2-3.8	0.1-0.2
Si	1.9-2.6	1.4-2.2	0.15-0.4
Mn	0.15-0.45	0.4-0.6	0.3-0.6
P	≤0.06	≤0.3	0.02-0.03
S	≤0.02	≤0.1	0.02-0.03
Mg	0.03-0.06

12) Feature:

Mechanical properties
	Ductile Cast Iron Pipe	Grey Iron Pipe	Steel Pipe
Tensile Strength(Mpa)	≥420	150-260	≥400
Yield Strength(Mpa)	≥300	No Confirmation	No Confirmation
Bending Strength(Mpa)	≥590	200-360	≥400
Elongation (%)	≥10	Neglected	≥18
Brinell Hardness(HBS)	≤230	≤230	About 140

13) T type mechanical joint

14) Packing: in bulk or container

PACKING: 1) Pipes are bundled together with the steel belt.

2) Wooden pieces are put between the pipes.

3) The bundles wrapped in plastic.

ISO2531 DI pipe